Valcourt Fireplace, Valcourt Waterloo FP15A

The Waterloo wood-burning fireplace, the largest model in our high-efficiency line, is an additional heating source whose appearance is every bit as impressive as its functionality. Styled to fit your preferences, the Waterloo provides a striking view of the flames. The firebox, with its roomy glass doors, can accommodate a substantial amount of wood, sufficient to heat huge areas and burn for up to 11 hours on a single load.

The innovative smart air control technology of the Waterloo was created with the purpose of maximizing combustion efficiency. After turning on, the main air damper needs to be manually closed in order to reduce the combustion rate. Afterwards, the system automatically closes the secondary air control and modifies the second primary air damper when it determines that the ideal combustion temperature has been reached. Auxiliary air control can be used to vary the degree of combustion after the system is closed.

Specification

APPLIANCE PERFORMANCE ⁽¹⁾

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

⁽⁹⁾ This appliance is officially tested and certified by an independent agency.

⁽¹⁰⁾ Carbon monoxyde.

GENERAL FEATURES

User Manual

GUIDES

FP15A Waterloo wood fireplace install & owner's manual
(PDF - 15.3 Mo)FP15A Waterloo wood fireplace dimensions
(PDF)FP15A Waterloo wood fireplace quick install reference guide
(PDF - 0.7 Mo)VA15FA06 - Faceplate Installation Instructions
(PDF - 1.7 Mo)

PLANS & CAD

2D Diagrams FP15A | VA15L01
(DWG - 0.8 Mo)2D Diagrams FP15A | VA15L01
(DXF - 3.3 Mo)2D Diagrams FP15A | VA15L02
(DWG - 0.7 Mo)2D Diagrams FP15A | VA15L02
(DXF - 2.7 Mo)2D Diagrams FP15A | VA15L03
(DWG - 0.5 Mo)2D Diagrams FP15A | VA15L03
(DXF - 2.1 Mo)2D Diagrams FP15A | VA15L04
(DWG - 0.8 Mo)2D Diagrams FP15A | VA15L04
(DXF - 3.2 Mo)

Warranty & Registration

REGISTRATION OF YOUR WARRANTY | VALCOURT

Register here