The Osburn 3300 is the epitome of economical, environmentally friendly heating. This non-catalytic wood stove is one of the cleanest on the market and an eco-friendly energy source, with an emission rate of 0.95 g/h. With its 90,000 BTU/h power, this north-south loading model will keep your family toasty all night long—even in extremely cold conditions.
A set of high density bricks, a stainless steel heat shield added to the C-Cast baffle, a new cast iron door mold, an integrated ash drawer, a top heat deflector, and attractive side panels all contribute to the heater's perfect design.
There are numerous configuration possibilities available with this latest generation wood stove. Apart from the conventional or linear legs and the black or brushed silver door overlay, you can select a pedestal, a stiff spark arrester, a blower with thermodisc, and a glass ash lip based on your requirements. Take inspiration and give your interior comfort a makeover!
Specification
APPLIANCE PERFORMANCE (1)
| Fuel type : |
Dry cordwood (16" recommended) |
| Recommended heating area-ft² : ()
|
900 - 2,300 |
| Overall firebox volume-ft³ : |
3.3 |
| EPA loading volume-ft³ : |
2.67 |
| Maximum burn time : ()
|
10 h |
| Maximum heat output-dry cordwood : (2)
|
90,000 BTU/h (26.4 kW) |
| Overall heat output rate < : (2) (3)
|
15,841 BTU/h (4.64 kW) to 57,041 BTU/h (16.72 kW) |
| Average overall efficiency (dry cordwood) : (3)
|
71.1 % (HHV) (4)
|
76.6 % (LHV) (5)
|
| Optimum overall efficiency : (6) (7)
|
78 % |
| Optimum heat transfer efficiency : (8)
|
74 % |
| Average particulate emissions rate : (9)
|
0.95 g/h |
| Average CO : (10)
|
61.3 g/h |
(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3) As measured per CSA B415.1-10 stack loss method.
(4) Higher Heating Value of the fuel.
(5) Lower Heating Value of the fuel.
(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7) Optimum overall efficiency at a specific burn rate (LHV).
(8) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
(9) This appliance is officially tested and certified by an independent agency.
(10) Carbon monoxyde.
GENERAL FEATURES
| Combustion technology |
Non-catalytic |
| High-efficiency certified appliance |
Yes, EPA 2020 approved |
| Maximum log length |
20" |
| Log positioning |
Loading over depth |
| Chimney diameter |
6" |
| Flue outlet diameter |
6" |
| Type of chimney |
CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height (feet) |
15' |
| Baffle type |
C-Cast or equivalent |
| Approved for an alcove installation |
Yes |
| Approved for a mobile home installation |
Yes, with fresh air intake |
| Shipping Weight |
525 lb (238 kg) |
| Door type |
Single, glass with cast iron frame |
| Glass type |
Ceramic glass |
| Glass surface – dimensions (Width X Height) |
14 1/2" X 11 5/8" |
| Glass air-wash system |
Yes |
| Overall dimension (Height) |
34" |
| Overall dimension (Width) |
24 1/4" |
| Overall dimension (Depth) |
30 1/2" |
| Door opening – dimension (Height) |
12" |
| Door opening - dimension (Width) |
16" |
| Firebox – dimension (Height) |
14 1/8" |
| Firebox – dimension (Width) |
19" |
| Firebox – dimension (Depth) |
21" |
| Firebox lined with refractory bricks for better heat distribution |
Yes |
| Stainless-steel secondary-air system improving gas combustion |
Yes |
| Model |
Legs or pedestal |
| Steel thickness – body |
3/16" |
| Steel thickness – top |
5/16" |
| USA standard (emissions) |
EPA |
| Canadian Standard (emissions) |
CSA B415.1-10 |
| USA standard (safety) |
UL 1482, UL 737 |
| Canadian standard (safety) |
ULC S627 |
| Tested and listed as per applicable standards |
By an accredited laboratory (CAN/USA) |
| Warranty |
Limited lifetime |
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
|
| |
Canada |
United-States |
| |
Single wall pipe |
Double wall pipe |
Single wall pipe |
Double wall pipe |
| Clearance – back wall |
14 1/2" |
6" |
14 1/2" |
6" |
| Clearance - corner |
10" |
8" |
10" |
8" |
| Clearance – side wall |
12" |
12" |
12" |
12" |
| Clearance – top (measured from the platform on which the appliance is installed)** |
84" |
84" |
84" |
84" |
|
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
|
|
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
|
User Manual
GUIDES
Wood stove manual | Safety notifications & general information
(PDF - 3.6 Mo)Osburn 3300 wood stove installation & operation requirements
(PDF - 8.9 Mo)Osburn 3300 dimensions
(PDF - 0.8 Mo)
